The black walnut we got in on 7/1/2025 has sold out, below were the pictures from that lot.
The black walnut we got in on 7/1/2025 has sold out, below were the pictures from that lot.
Black Walnut - Piece #1
Walnut Piece #1 - Sold
This along with piece number 2 are the premier boards of the lot. This ranges in width from 13" - 16" and is 102" long. Thickness is just shy of 1 3/4". The board was planned and kiln dried at H&K Lumber.
Black Walnut - Piece #2
Walnut Piece #2 - Sold
This like piece #1 is a beautiful, straight, long piece of walnut. The dark color nearly goes the entire length and width. It is 102" long, 13" - 16" wide, most over 14", and nearly 1 3/4" thick. This piece has been kiln dried. This would pair well with piece number 1 to make a table or a couple pieces of furniture.
Black Walnut - Piece #3
Black Walnut Piece #3 - Sold
This is from the same log as the previous two pieces. It is also 102" long, a good width of 11 1/2" - 15" wide. It is a little less than 1 3/4" thick. This piece has been kiln dried.
Lots of character and great black walnut color. Come take a look at this piece today!
Black Walnut - Piece #4
Black Walnut Piece #4 - Sold
Another great looking black walnut piece. Great walnut color. This is 102" long, 10" - 14" wide and almost 1 3/4" thick. This piece has been kiln dried. Another great piece to create something unique for your home.
Black Walnut - Piece #5
Black Walnut Piece #5 - Sold
This piece is even longer at 104 inches. The majority of the piece is over 10" wide, but the piece does vary from 8" wide to 11 1/2" wide. Over 6 feet of the board would be at least 10" wide. This board is planned at 1 3/4" thick. This piece has been kiln dried.
Black Walnut #6 - Sold
A nice long piece at 113 inches. Width is fairly consistent at over 10" wide, but does vary between 9.5 and 12 inches. It has been planned to just about 1 3/4 inches thick. This piece was also kiln dried at H&K woods. From the pictures you can see this has a lot of character with beautiful patterns throughout.
Black Walnut #7 - Sold
Another fantastic example of black walnut. This is 113" long, varies between 8.5 and 15 inches wide, most like piece #6 is around the 10 inch width. This was planned to just about 1 3/4 inches thick and also kiln dried at H&K Woods.
Black Walnut - Piece #8
Black Walnut #8 - Sold
This is a nice piece at 79" long, 7 to 10.5" wide, and planned to just about 1 3/4 inches thick. This piece was also kiln dried at H&K Woods. Great looking grain and beautiful black walnut color throughout. Come check out this piece!
Black Walnut - Piece #9
Black Walnut #9 - Sold
This piece comes in at 80" long, 9-12" wide, and nearly 1 3/4" thick. It has been planned and kiln dried at H&K Woods here in the Fox Valley. This piece has great color throughout. Stop by today to take a look.
Black Walnut - Piece #10
Black Walnut 10 - Sold
A great looking piece. This one is 103" long, 9 - 11.5" inches wide and planned down to about 1 3/4" thick. The patterns and color on this look great. This was kiln dried and planned at H&K Woods.
Black Walnut - Piece #11
Black Walnut 11 - Sold
This piece looks great, but is a bit unique. It has a length of 104" overall, but as you can see from the pictures the backside shows some of the bare log. That is about 81" long before getting to that point. Width varies from 6 - 9 inches. This was planned to about 1 3/4" and also kiln dried.
Black Walnut - Piece #12
Black Walnut 12 - Sold
These pictures are a bit dark as I ran out of daylight for these. However, this is a nice piece as well. It is 113" long with a width varying from 8 3/4 to 15" wide. I'd say it is closer to 10". It was planned to the approximate thickness of 1 3/4" and was also kiln dried at H&K Woods.